Distributed Name Service (DNS) Management Operations Manual

SET SSTYPE
The DNSCOM Commands
31258 Tandem Computers Incorporated 7–217
SET SSTYPE The SET SSTYPE command establishes creation values for use by subsequent ADD
SSTYPE commands. This command may be used only in definition mode.
SET [ SSTYPE ]
[ LIKE an ssobject type [ IN subsystem ] [ at-part ] ]
[ parameter ]
[ , parameter ] ...
where at-part is:
AT { \ system | name manager }
SSTYPE
may be omitted if the default object is SSTYPE.
an ssobject type
is the name of an subsystem-object type. This causes all SSTYPE attributes to
assume creation values equal to those defined for an ssobject type .
IN subsystem
is the name of a subsystem. This may be omitted if an ssobject type is
defined by only one subsystem.
{ \ system | name manager }
indicates a system or name manager where an ssobject type is defined. If
omitted, the current name manager is assumed.
\ system is a Guardian 90 system name. It designates a node other than the
current system for processing the command. name manager designates a
configuration other than the current one.
parameter
is one of the following:
DOMAIN { domain | LOCAL }
domain
is the name of a domain.
When specified, it becomes the default domain for instances of
subsequently added object types.