Distributed Name Service (DNS) Management Operations Manual

SHOW COMPOSITE
The DNSCOM Commands
31258 Tandem Computers Incorporated 7–223
SHOW COMPOSITE The SHOW COMPOSITE command displays the composite creation attributes that
have been established by the SET COMPOSITE command.
SHOW [ COMPOSITE ] [ parameter [ , parameter ] ... ]
COMPOSITE
may be omitted if the default object is COMPOSITE.
parameter
is one of the following:
[ COMPONENT ] ssobject type [ IN { subsystem | * } ]
COMPONENT *
DOMAIN
GROUPS
TYPE
ssobject type
is the name of a subsystem-object type.
subsystem
is the name of a subsystem defining ssobject type . This must be specified
if the type of composite being altered requires the same subsystem-object type
from two different subsystems.
If no parameters are supplied, the values of the attributes listed above are
displayed.
Default values for DNS attributes are listed in Table 6-1 in Section 6.
Examples
SHOW COMPOSITE
SHOW COMPONENT LU
SHOW COMPOSITE GROUPS