Distributed Systems Network Management (DSNM) Subsystem Interface Development Guide

SHOW Command
7-10
109759—Distributed Systems Network Management (DSNM) Subsystem Interface
Development Guide
DSNMCom: The I Process Test Utility
When SEND-SECINFO is FALSE, DSNMCom sends logon information
(ZDSN^TKN^LOGON^INFO) in the same manner as an external DSNM requester
(such as NonStop NET/MASTER). Logon information is only sent if parameter USER
is set.
If you are testing an I process or a secondary command server, use TRUE for
SEND-SECINFO. If you are testing a primary command server, use FALSE for
SEND-SECINFO.
TYPED-OUTPUT
When TYPED-OUTPUT is set to TRUE, DSNMCom displays the VTY type
information for each line of output from a server response.
USER
USER is the NonStop Kernel user ID of the user under which the command is to be
processed by the server. USER can be set to groupname.username or
groupnumber,usernumber.
Consideration
USER is allowed only if DSNMCom is licensed.
SHOW Command
The SHOW command displays the current values of all the DSNMCom parameters. If
you follow the SHOW command with a parameter name, DSNMCom displays the
current setting of that parameter.
Considerations
None.
SHOW [ paramname ]