Distributed Systems Network Management (DSNM) Subsystem Interface Development Guide

DSNMCom Messages
7-12
109759—Distributed Systems Network Management (DSNM) Subsystem Interface
Development Guide
DSNMCom: The I Process Test Utility
DSNMCom Messages
DSNMCom produces the following messages, which are displayed on the OUT listing
device.
Cause. You tried to issue a DSNM command without first opening a process.
Effect. You are returned to the DSNMCom prompt.
Recovery. Use the OPEN command to open a started process; then resubmit the
command.
Cause. You provided an invalid process name to DSNMCom.
Effect. You are returned to the DSNMCom prompt.
Recovery. Use the OPEN command and provide a valid process name.
Cause. You tried to open a process without providing a process name.
Effect. You are returned to the DSNMCom prompt.
Recovery. Reenter the command with a valid process name.
Cause. A file system error occurred when DSNMCom attempted a WRITEREAD to
either the input file, the output file, or the currently open process file.
Effect. If the error occurred on the input file, the message is written to the output file
and DSNMCom abnormally ends.
If the error occurred on the output file, the message is written to the home terminal and
DSNMCom abnormally ends.
If the error occurred on the currently open process file, the message is written to the
output file and the process file is closed. Any subsequent SEND commands result in an
“ERROR -- no server open” message until an OPEN command is successfully
processed.
Recovery. See the Guardian Procedure Errors and Messages Manual for a description
of the specific file system error and the appropriate recovery action.
ERROR -- no server open: use OPEN <process>
ERROR -- Invalid process name
ERROR -- process name expected
File System error nn ON filename