Distributed Systems Network Management (DSNM) Subsystem Interface Development Guide

DSNMCom Messages
7-16
109759—Distributed Systems Network Management (DSNM) Subsystem Interface
Development Guide
DSNMCom: The I Process Test Utility
Cause. DSNMCom is unable to recognize the command because the command line did
not begin with the current COMMAND-CHAR character, and the command is not a
valid DSNM command.
Effect. The command is not executed.
Recovery. Correct and reissue the command.
Cause. A DSNM error occurred during the file operation.
Effect. See the description in the error-text portion of the message.
Recovery. See the error-text portion of the message.
Cause. An SPI error occurred.
Effect. The command is not executed
Recovery. Check the SPI error identified in the message and refer to the SPI error
documentation in the SPI Programming Manual.
Cause. An SPI error occurred.
Effect. The command is sent without the security token.
Recovery. Check the SPI error identified in the message and refer to the SPI error
documentation in the SPI Programming Manual.
Cause. An SPI error occurred.
Effect. The command is sent without the security token.
Recovery. Check the SPI error identified in the message and refer to the SPI error
documentation in the SPI Programming Manual.
ERROR -- invalid DSNMCom command
DSNM error: error-text ON filename
SSGETTKN Error nn on LOGON^INFO token
Warning: SSPUTTKN Error nn adding the SECURITY-INFO token
Warning: Error nn trying to construct SECURITY-INFO token
SECURITY-INFO not added to command buffer