Distributed Systems Network Management (DSNM) Subsystem Interface Development Guide

DSNMCom: The I Process Test Utility
Distributed Systems Network Management (DSNM) Subsystem Interface Development
Guide—109759 7-19
DSNM Parser Errors
Cause. A consistency error was encountered in the parser object type table.
Effect. Commands cannot be correctly interpreted.
Recovery. Contact your Tandem representative. Be prepared to describe the problem in
detail as recommended in “What to Prepare Before Contacting Your Tandem Support
Representative” on page B-1.
Cause. A consistency error was encountered in the parser parameter data type table.
Effect. Commands cannot be correctly interpreted.
Recovery. Contact your Tandem representative. Be prepared to describe the problem in
detail as recommended in “What to Prepare Before Contacting Your Tandem Support
Representative” on page B-1.
Cause. A keyword, subsystem name, or object type was out of place.
Effect. The command is not executed.
Recovery. Correct and reissue the command. If the error was caused because an object
name is the same as a keyword, subsystem name, or object type, enclose it in quotation
marks.
Cause. A consistency error was encountered in the parser subsystem table.
Effect. Commands cannot be correctly interpreted.
Recovery. Contact your Tandem representative. Be prepared to describe the problem in
detail as recommended in “What to Prepare Before Contacting Your Tandem Support
Representative” on page B-1.
Cause. The command contains a serious syntax error.
Effect. The command is not executed.
Recovery. Correct and reissue the command.
Object type table error
Param datatype table error
Reserved word misplaced
Subsys table error
Syntax error