Distributed Systems Network Management (DSNM) Subsystem Interface Development Guide

Messages From the DSNM Parser
B-10
109759—Distributed Systems Network Management (DSNM) Subsystem Interface
Development Guide
DSNM Error Codes
Messages From the DSNM Parser
The following errors may be generated by the DSNM parser, which interprets DSNM
commands before they are executed.
Cause. You misspelled a command or issued a command that is not supported.
Effect. Your command is not executed.
Recovery. Correct and reissue the command.
Cause. Your command includes more objects than are allowed in a single command.
Effect. Your command is not executed.
Recovery. Simplify the command, or break it into multiple commands if necessary.
Cause. You nested parentheses beyond the maximum allowable depth.
Effect. Your command is not executed.
Recovery. Simplify the command or break it into two or more commands, if necessary.
Cause. You entered too many parameters or an excessively long parameter.
Effect. Your command is not executed.
Recovery. Simplify the command, or break it into multiple commands if necessary.
Cause. An error that DSNM does not recognize occurred during the processing of your
command. This is the mechanism by which file system errors associated with Tandem
data communications subsystems other than AM3270, Expand, SNAX/CDF, SNAX/XF,
TR3271, or X25AM are reported.
Effect. The effects of this problem vary, depending on the situation.
Recovery. If the reporting subsystem is a Tandem data communications subsystem
other than AM3270, Expand, SNAX/XF, SNAX/CDF, TR3271, or X25AM, and the
Command not recognized
Exceeded max objects
Exceeded max paren levels
Exceeded param space
Invalid Error number: error