Distributed Systems Network Management (DSNM) Subsystem Interface Development Guide

DSNM Error Codes
Distributed Systems Network Management (DSNM) Subsystem Interface Development
Guide—109759 B-11
Messages From the DSNM Parser
error is a positive number, refer to the Guardian Procedure Errors and Messages
Manual for an explanation of the file system error and its recovery.
If the error is not a file system error, call your Tandem representative. Prepare the
necessary information as suggested in “What to Prepare Before Contacting Your
Tandem Support Representative” on page B-1.
Cause. You specified an object type that is not valid.
Effect. Your command is not executed.
Recovery. Correct and reissue the command.
Cause. You specified a modifier or parameter that is not valid for any command.
Effect. Your command is not executed.
Recovery. Correct and reissue the command.
Cause. A modifier or parameter was entered that is not valid with this command.
Effect. Your command is not executed.
Recovery. Correct and reissue the command.
Cause. You omitted the object type when it was required.
Effect. Your command is not executed.
Recovery. Correct and reissue the command.
Cause. You entered a name that is longer than the maximum legal length.
Effect. Your command is not executed.
Recovery. Correct the name and reissue the command.
Invalid Object Type
Invalid option
Invalid option for this command
Missing Object Type
Name too long