Distributed Systems Network Management (DSNM) Subsystem Interface Development Guide

DSNM Commands

Distributed Systems Network Management (DSNM) Subsystem Interface Development

Guide—109759 2-11

The INFO Command

Use the INFO command to obtain configuration information on objects.

The INFO command is not appropriate for all object types. Refer to the User’s Guide to

DSNM Commands for information on how the command is interpreted by each

subsystem.

objectspec

is the object specification. The syntax for the object specification is provided in

“Object Specification” on page 2-2.

hierarchy-modifier

determines which objects are affected by the command, based on the subsystem

object hierarchy: ONLY, SUBONLY, or ALL (default).

error-modifier

determines how much information is reported when the command is correct but the

objects against which the command is being applied produce errors. The error

modifier does not affect the command response for errors that result when a

command is entered incorrectly or when a name cannot be resolved. Possible error

modifiers are ERROR-BRIEF (default), ERROR-DETAIL, and

ERROR-SUPPRESS.

Example

The following command returns the configuration information for the PATHMON-

controlled terminal DPWT3 under \BERLIN.$PMD with the alias TERM-3:

INFO TERM-3

A sample response to the command is:

PATHWAY TERM DPWT3 UNDER \BERLIN.$PMD

Autorestart: 0

Break: off

Diagnostic: on

Displaypages: -1

Echo: on

Exclusive: off

File: \BERLIN.$TM13B

Initial: ENABLE-RELEASE

Inspect: off

Inspectfile:

Ioprotocol: 0

Maxinputmsgs: 0

Printerattached: no

INFO objectspec [, objectspec ]...

[, hierarchy-modifier ]

[, error-modifier ]