Distributed Systems Network Management (DSNM) Subsystem Interface Development Guide

The STOP Command
2-22
109759—Distributed Systems Network Management (DSNM) Subsystem Interface
Development Guide
DSNM Commands
during which time the objects can be reported by DSNM as in either the DOWN or the
PENDING state.
Because each subsystem must stop its objects in a predetermined order, the ONLY
hierarchy modifier is ineffective with certain object types if their subordinate objects are
still up; that is, stopping certain object types forces their subordinates to also be stopped.
The STOP command is not appropriate for all object types; refer to the User’s Guide to
DSNM Commands for details on these restrictions.
Example
The following command stops the PUs and LUs that are subordinate to the SNAX line
\WYJ.$STLR. It does not stop the SNAX line itself. No error information is returned if
a subsystem error occurs while the command is being executed.
STOP SNAX LINE \WYJ.$STLR, SUB-ONLY, ERROR-SUPPRESS