DSM/SCM Event Management Programming Manual

Event Messages
DSM/SCM Event Management Programming Manual—529844-003
5-159
5027 ZPHI-EVT-OVRIDE-PRM-MISSING
DSM/SCM checks for the OVERRIDE Pathway parameters and matches their
values with the configuration revision being applied. If a match occurs, the Apply
continues to the specified SYSnn subvolume without replacing the OSIMAGE, and
no system load is required because the system continues running on the same
OSIMAGE. If the parameter is not detected, is incorrect, or does not indicate the
configuration revision being applied, the OSIMAGE might be replaced, or an error
5026 might be issued.
5027 ZPHI-EVT-OVRIDE-PRM-MISSING
OVERRIDE-SYSNN and OVERRIDE-SYSNN-DIFFERENT-OS parameters were
specified to continue the Apply to the currently executing SYSnn subvolume.
ZPHI-TKN-SYS-NN-NBR
is the octal number of the currently executing SYSnn subvolume.
Cause. DSM/SCM detected that the new OSIMAGE file is different from the current
OSIMAGE. OVERRIDE parameters were specified to ignore this difference and
continue processing.
Effect. The Apply continues processing.
Recovery. No action is required.
Tokens
ZPHI-TKN-SYS-NN-NBR <1> token-type ZSPI-TYP-STRING
Message Text
DSM/SCM has detected that the OSIMAGE file is different from
the currently executing OSIMAGE file in SYSnn <1>. The
OVERRIDE-SYSNN and OVERRIDE-SYSNN-DIFFERENT-OS params have
been specified to allow the APPLY to go to SYSnn <1> anyway.
The new OSIMAGE file and the 'currently executing' OSIMAGE
file are different sizes. The 'currently executing' OSIMAGE
file will be retained.