DSM/SCM Messages Manual

DSM/SCM EMS Messages
DSM/SCM Messages Manual—529845-006
5-17
2034
filename
is the file name in the internal format of the file where the error occurred.
Cause. A warning or restartable file error occurred during the specified procedure or
action.
Effect. If the error is a warning, the activity continues processing. If the error is
restartable, the activity stops in a restartable state.
Recovery. Check the file-system error code in the message. For a definition of the
specified error, see Section 7, File-System Errors. For more detailed information,
including recovery actions, see the Guardian Procedure Errors and Messages Manual .
If the error is a warning, the operator or planner might need to decide if corrective
action is needed. If the error is restartable, correct the error and restart the activity.
If the file name was $EMSLOGF.ILEERROR, the server process could not send an
EMS message out to the DSM/SCM EMS collector. Instead, this error was reported
back to the Schedule Manager on behalf of the server that could not send out the
message. This is most likely caused by an internal code error where an EMS message
routine was not called. Performing a trace will help identify the faulty code to
development.
2034
error-type
indicates whether the error is restartable or a warning. Possible values:
Restartable error Warning
file-error
is the file-system error that occurred. For file-system error definitions, see
Section 7, File-System Errors.
action-name
is the name of the procedure or action during which the error occurred. Possible
values:
AWAITIO OPEN
CLOSE POSITION
CONTROL PUP Listlabel
CREATE READ
DELETE READUPDATE
DEVICEINFO2 RENAME
DISKINFO REPLY
error-type file-error on action-name of file/process
filename . If error type is Warning, decide upon corrective
action. If error type is Restartable, correct error and
RESTART activity.