DSM/SCM Messages Manual

DSM/SCM EMS Messages

DSM/SCM Messages Manual—529845-006

5-69

4010

file-error

is the file-system error that occurred. For file-system error definitions, see

Section 7, File-System Errors.

volume-name

is the name of the scratch volume that could not be accessed.

Cause. DSM/SCM could not access the specified scratch volume on the target scratch

list.

Effect. The activity stops in a restartable state.

Recovery. Check the file-system error code in the message. For a definition of the

specified error, see Section 7, File-System Errors. For more detailed information,

including recovery actions, see the

Guardian Procedure Errors and Messages Manual

Correct the error based on the recovery specified for the file-system error. Restart the

activity.

4015

Cause. Files have been added to one or more of the indicated defines sections of the

CONFTEXT file. DSM/SCM does not let files be added to a revision through the

CONFTEXT file.

Effect. DSM/SCM stops and issues this message.

Recovery. Remove the file names from the CONFTEXT file. The files must be brought

into the archive as inputs, then added to the software revision before you request that

the revision be built.

Error

file-error

accessing scratch volume

volume-name

Correct problem indicated in error. RESTART activity.

DSM/SCM does not allow user extensions to the standard

defines in the STANDARD_MICROCODE,

SYSTEM_PROCESS_LIBRARY_FILES, SYSTEM_LIBRARY_CODE_FILES,

SYSTEM_PROCESS_CODE_FILES, FILES_TO_COPY_TO_NEW_SYSTEM

sections of the SYSGEN configuration file. Add the additional

software to the revision before requesting a build.