DSM/SCM Messages Manual

DSM/SCM EMS Messages
DSM/SCM Messages Manual—529845-006
5-72
4033
4033
product-list
is one or more product numbers.
Cause. The listed products either were received into the Archive by a pre-D46 PVU of
DSM/SCM or contain non-pax files (filecode not 0 or 180) in the ZOSSUTL TSV.
Effect. The Build stops. The A7CINFO files must be processed before DSM/SCM can
manage these OSS files.
Recovery. Cancel the Build request. Either use the D46 or later DSM/SCM PVU to
receive these products into the Archive again using the Receive All Files option, or
clear the Manage OSS Files check box for this logical target. Perform another Build. If
the product contains non-pax files in the ZOSSUTL TSV, use CNFGINFO to re-create
the TSV for the non-pax file. If you need help completing the correct CNFGINFO
processing, contact the product vendor.
4035
Cause. You indicated that the logical target associated with this Build is to manage
OSS files, but the configuration contains no DSM/SCM-enabled OSS products.
Effect. The Build stops restartable because the operator instructions generated for
this Build are incorrect if OSS files are not managed by DSM/SCM.
Recovery. Cancel the Build. Clear the Manage OSS Files check box for this logical
target, and perform a new Build.
The following OSS products either have unprocessed A7CINFO
files, or contain non-pax files in ZOSSUTL: product-list . To
process the A7CINFO files, re-receive these products into the
archive using the Receive All Files option. Use CNFGINFO to
remove any non-pax files from ZOSSUTL. CANCEL Build. Perform
another Build request.
No DSM/SCM enabled OSS products found(no A7CINFO files) in
the configuration. CANCEL the Build, Remove OSS management
from this Logical Target, and perform another Build.