DSM/SCM Messages Manual

DSM/SCM EMS Messages
DSM/SCM Messages Manual—529845-006
5-88
4250
4250
Cause. DSM/SCM finished building a configuration, putting its activation package onto
a labeled tape. The Apply process cannot read an activation package directly from a
labeled tape.
Effect. The activation package cannot be applied until it is restored to disk.
Recovery. Use Restore to restore the activation package from the labeled tape onto
the target system, then perform the Apply.
4260
Cause. DSM/SCM is ready to run a system generation program because system
generation is required for the current Build.
Effect. Informational message only; no corrective action is needed.
Recovery. Informational message only; no corrective action is needed.
WARNING: You must restore the labeled Activation Tape onto
the target system and do the apply from disk.
Running SYSGEN.