DSM/SCM Messages Manual

DSM/SCM EMS Messages
DSM/SCM Messages Manual—529845-006
5-89
4261
4261
Cause. The ZIMPIMP file is not found in the TNS/E configuration in the host database.
Effect. The Build stops restartable.
Recovery. Cancel the Build. Then perform another Build request that requires system
generation. You can force system generation by changing the CONFTEXT file with a
comment.
4262
configuration-revision
is the name of the configuration revision you are trying to build; for example:
\CRONUS DEFAULT 10
release-version-update
is the release version update (RVU) of the SUT used for building a configuration.
For example: G06.26.
processor-type
is the processor type of the system. For example: TNS/E.
Cause. You used either a G nn.nn RVU to build a configuration for a TNS/E target or
a H
nn.nn RVU to build a configuration for a TNS/R target.
•
A G nn.nn SUT is intended only for a NonStop S-series system (TNS/R).
•
An H nn.nn SUT is intended only for an Integrity NonStop system (TNS/E).
Effect. The Build stops restartable.
Recovery. Cancel the Build request. Check that the processor type is set correctly in
the system maintenance profile for the system you are creating a configuration for.
Re-create another configuration revision using a SUT with the correct RVU.
Internal Error: DSM/SCM can not find the manufactured ZIMPIMP
file in the TNS/E configuration. CANCEL Build. Perform
another Build request that requires a sysgen.
configuration-revision is based on a release-version-update
SUT. This conflicts with the CPU type which was set as
processor-type in the system maintenance profile .