DSM/SCM Messages Manual

DSM/SCM EMS Messages
DSM/SCM Messages Manual—529845-006
5-96
5014
5014
system-name
is the name of the logical target for which the configuration is being applied.
Cause. The Manage OSS Files check box for this target is checked, and the
configuration qualifies for OSS file management.
Effect. OSS files are installed and managed by DSM/SCM for this logical target.
Recovery. Informational message; no corrective action is necessary.
5015
configuration-name
is the name of the configuration to which you are trying to back out.
reason
is the reason the Backout could not be performed. Possible values:
not most recently applied
no backup exists
Cause. You are trying to perform a Backout, but DSM/SCM cannot find a previously
saved configuration. Either a Backout has already been performed, or the previous
configuration was incorrectly specified.
Effect. The activity finishes with errors. DSM/SCM does not perform a Backout.
Recovery. Check that a previous configuration exists and that its location is correctly
displayed on the Backout—Verify Request screen in the Target Interface; then
resubmit another Backout activity for the target.
DSM/SCM will install OSS files for target system-name .
Cannot BACKOUT configuration configuration-name , reason .
Ensure there is a previously saved configuration before you
attempt to BACKOUT a configuration.