DSM/SCM Messages Manual

DSM/SCM EMS Messages
DSM/SCM Messages Manual—529845-006
5-103
5028
5028
sysnn-num
is the octal number of the currently executing SYS nn .
Cause. An Apply detected that the old and new OSIMAGE files are different versions,
and the OVERRIDE-SYSNN-DIFFERENT-OS parameter was not specified to ignore
the difference.
Effect. The Apply request stops restartable.
Recovery. You have three alternatives:
•
Perform a system load from a different SYS nn and then restart the Apply.
•
Cancel the Apply and then start a new Apply request specifying a different target
SYS nn .
•
Force an Apply to the same SYS nn and ignore the new OSIMAGE; then specify
this OVERRIDE Pathway parameter to the Target Activator (TA):
PATHCOM $YPHI
> ALTER TA-001, param 'OVERRIDE-SYSNN-DIFFERENT-OS' ' logical-
target-nameRevision '
For example, for the logical target named default with configuration revision
number 19,
logical-target-nameRevision is default19. There is no space
between the configuration name and number, and the parameter is not case-
sensitive.
DSM/SCM has detected that the new OSIMAGE file is different
from the currently executing OSIMAGE in SYSnn sysnn-num . The
OVERRIDE-SYSNN param has been specified to allow the APPLY to
go to SYSnn sysnn-num anyway. However, the current OSIMAGE
and new OSIMAGE file are different sizes. If you are sure the
two OSIMAGE files are the same version, specify the OVERRIDE-
SYSNN-DIFFERENT-OS param and restart the request. Otherwise,
either coldload from a different SYSnn and RESTART the
activity, or CANCEL this activity and START a new APPLY
specifying a different target SYSnn.