DSM/SCM Messages Manual

DSM/SCM EMS Messages

DSM/SCM Messages Manual—529845-006

5-114

5075

filename

is the name of the file that has been removed.

subvolume-name

is the name of the expected subvolume location.

Cause. A target file managed by DSM/SCM has been removed or replaced with a

different version from its expected volume and subvolume location.

Effect. This message informs the operator and planner of the removal. The DSM/SCM

database is updated to reflect the new target subvolume (TSV) file location.

Recovery. Informational message only; no corrective action is needed.

5080

Cause. The target system is protected by Safeguard, but Safeguard was not running.

No file placement can be performed at the target until Safeguard is running.

Effect. The activity stops in a restartable state. No file placement is performed.

Recovery. Either start Safeguard on the target system so that Safeguard can put the

correct protection on the DSM/SCM files, or use the Maintenance Interface to change

the system profile for the target system so that Safeguard protection is no longer

required.

DSM/SCM has detected that TSV file

filename

has been removed,

or replaced with a different version, from expected subvolume

subvolume-name

The DSM/SCM database will be updated accordingly.

No file placement performed; SAFEGUARD must be running before

this APPLY or BACKOUT activity can be RESTARTED. Either a)

bring up SAFEGUARD and restart the activity or b) cancel this

activity and use the MI as follows before starting a new

activity--use the host MI (if you performed an APPLY) or the

target MI (if you performed a BACKOUT) to change the

attribute for this target so that SAFEGUARD protection is no

longer required.