DSM/SCM Messages Manual

DSM/SCM EMS Messages
DSM/SCM Messages Manual—529845-006
5-136
5270
5270
filename
is the file that contains an invalid alternate key file reference.
Cause. DSM/SCM received error 21 from the File Utility Program (FUP) when
attempting to copy (DUP) this file. The file has an incorrect alternate key attribute.
Effect. The activity stops in a restartable state.
Recovery. Correct the alternate key file name referenced in the specified file and
restart the activity.
5280
Cause. The Place All Files option could not be used because no historical information
was in the database. The DSM/SCM version used to apply the current or previous
configuration is prior to T6031AAO. This historical information in the database was not
produced until T6031AAO. For more information on the Place All Files option, see the
DSM/SCM User’s Guide .
Effect. The Apply completes with warnings. Only changed files are placed.
Recovery. Informational message only; no corrective action is needed. The Place All
Files option works with future applied configurations as long as the next two
configurations are not backed out.
File filename has an invalid alternate key filename. Correct
the alternate key value for this file with FUP ALTER file-
name, ALTFILE alt-file command. RESTART activity.
WARNING: Insufficient information to process the Place All
Files option. The Place All Files option has been disabled.
The normal default behavior of placing only changed files
will be enabled. The current and previous configuration must
be applied on the system by an T6031AAO or later before the
Place All Files option can be used.