DSM/SCM Messages Manual

File-System Errors
DSM/SCM Messages Manual—529845-006
7-8
230 %346 Processor power failed, then restored
231 %347 Controller power failed, then restored
232 %350 Access denied, SMON communication error
233 %351 SERVERCLASS_SEND_ error
240 %360 Network line-handler error, operation not started
241 %361 Network error, operation not started
246 %366 External cluster bypass error, operation aborted
248 %370 Network line-handler error, operation aborted
249 %371 Network error, operation aborted
250 %372 All paths to the system are down
251 %373 Network protocol error
252 %374 Required Expand class not available
255 %377 Too many interrupts or net line handler flooded
300-511 %454-
%777
Reserved for application processes
549 %1045 Block mode is not currently allowed on this terminal.
550 %1046 Illegal position or key value
551 %1047 Duplicate exists for insertion-ordered alternate key
560 %1060 A PIN greater than 255 was encountered
561 %1061 The system did not recognize an item code in a list
563 %1063 Buffer too small
564 %1064 The system detected an operation that is not allowed for this file type
565 %1065 Illegal request
566 %1066 Illegal reply
567 %1067 Define used is incompatible for use with the target system’s TOS
version
573 %1075 Requested process handle cannot be returned
578 %1102 Block size specified is too large
579 %1103 Record size specified is too large for the given block size, file type,
and format
581 %1105 Operation involving 32-bit primary keys was attempted on an open
that specified the use of 64-bit keys
582 %1106 Alternate key information could not be returned because it could not
be expressed in the superseded format of the parameter
583 %1107 Extent size specified is too large or the maxetents limit is too large
Table 7-1. File-System Errors (page 8 of 12)
Decimal
Number
Octal
Number Description