DSM/SCM Messages Manual

BACKUP Errors
DSM/SCM Messages Manual—529845-006
8-2
7522 Tape verify found problem with ending volume label
7523 Tape verify found different number of data blocks than should have been
written
7524 Tape verify found file label problem
7525 Tape verify found data block problem
7526 Tape verify found beginning volume label does not match what should
have been written
7527 System image tape too short
7528 Not a BACKUP tape (bad label identifier)
7529 Not a BACKUP tape
7530 Wrong tape mounted
7531 Bad beginning volume label for system image tape
7532 Bad tape sequence number value
7533 Out of sequence tape record
7534 Not from the same BACKUP tape set
7535 Bad tape format (too many data blocks found for file on tape)
7536 Bad tape format (data block too long for file)
7537 Bad tape format (data block too short for file)
7538 Data block too long for this BACKUP tape
7539 Bad tape format (did not find ending volume label after tape mark for
continued file)
7540 First tape must be mounted
7541 Tape drive does not support streaming selection
7542 Cannot turn on tape buffering because of insufficient I/O buffer space
Table 8-1. BACKUP Errors (page2of2)
Error Number Text Description of Error