DSM/SCM Messages Manual

DSM/SCM Messages Manual—529845-006
2-1
2 Target Interface Messages
Warning and Error Messages
These messages appear at the bottom of the Target Interface screens:
Cause. You have incorrectly entered a spooler, tape, or disk location.
Effect. DSM/SCM displays the expected format.
Recovery. Depending on the screen, enter the correct information:
item not found or invalid format, expected expected-format .
If you are on this
screen...
Enter a correct... and press...
System Report spooler or disk location F1 to submit the request
Initiate Audit volume.subvolume name F7 to add the subvolume; then
F1 to initiate the audit
S/W Apply-Get Instructions tape drive name or disk
location
F1 to submit the request
S/W Apply-Submit Apply SYS nn
tape drive name or disk
location (for the snapshot)
spooler or disk location
(for the print location)
F1 to submit the request
or
F9 to print the instructions
S/W Apply-Complete
Apply
spooler or disk location F9 to print the instructions
Backout-Verify Backout tape drive name or disk
location
F1 to submit the request
Backout-Complete
Backout
spooler or disk location F9 to print the instructions
Create Snapshot-Submit
Request
tape drive name or disk
location
F1 to submit the request
Show EMS Messages spooler or disk location F9 to print the EMS messages
Show Non-Request Errors spooler or disk location F9 to print the EMS messages
Enable Trace disk location for trace output F1 to enable Trace