DSM/SCM Messages Manual

Target Interface Messages
DSM/SCM Messages Manual—529845-006
2-9
Status Messages
Cause. An operator pressed F6 to cancel the request.
Effect. DSM/SCM cancels the request.
Recovery. Informational message only; no corrective action is needed.
Cause. A problem occurred while DSM/SCM was processing a cancel request issued
by an operator.
Effect. DSM/SCM stops in a restartable state.
Recovery. Restart the cancel request:
1. Press F4 to view the EMS messages for this request.
2. Correct any problems if necessary.
3. Press F3 to restart the cancel request.
Cause. A problem occurred while DSM/SCM was processing a cancel request issued
by an operator.
Effect. DSM/SCM stops in a nonrestartable state.
Recovery. Delete the request:
1. Press F4 to view the EMS messages for this request.
2. Correct the problems, exiting DSM/SCM if necessary.
3. Use the Maintenance Interface (ZPHITMI) to delete the request from the system.
Cause. The request finished processing.
Effect. DSM/SCM lets other tasks start.
Recovery. Informational message only; no corrective action is needed.
Cancelled.
Cancel processing stopped in restart state.
Cancel stopped in non-restartable state.
Complete.