DSM/SCM Quick Reference Guide

DSM/SCM Quick Reference Guide—529847-005
1-1
1
Configuring a Host or Physical
Target System
This section describes configuring DSM/SCM on a system. For more information on
configuring and initializing DSM/SCM, see the DSM/SCM User’s Guide .
Before you use this procedure, check that the system name and number are set to
where you want to keep them.
Preliminary Task: Install the DSM/SCM PC
Files
If DSM/SCM is not already installed on your PC or if you are installing a newer version
of DSM/SCM, you must complete this task. This task assumes you are using Winsock.
For more information, see the DSM/SCM User’s Guide .
Task 0.1: Ensure TCPIP and LISTNER Are Installed
Ensure that the TCPIP file and its LISTNER program are installed in the current host
system SYS nn subvolume. To determine what SYS nn is running, on the host system:
> sysinfo
Task 0.2: Transfer DSM/SCM PC Files From the SUT to the PC
1. On the host system, make ZDSMSCM the current subvolume:
> VOLUME $ volume .ZDSMSCM
2. Using IXF or a similar method, copy the ZDSMEXE file from the ZDSMSCM
subvolume on the HP NonStop host to a subdirectory called \DSMSCM on the PC.
The subdirectory can be on any drive with sufficient space. Place the file in an
empty folder and directory.
3. Rename the file ZDSM.EXE.
4. Double-click the ZDSM.EXE file to decompress the DSM/SCM files you just
transferred to your PC.
Task 0.3: Ensure Winsock Is Installed
Ensure Winsock is installed on the PC and that WINSOCK.DLL is in the \WIN,
\WINDOWS, or another directory.