DSM/SCM User's Guide

About This Guide
DSM/SCM User’s Guide — 529846-014
xxi
What’s in This Guide
What’s in This Guide
Table i. Summary of Contents (page 1 of 3)
Section Title This section . . .
PART I DSM/SCM Overview
1
Introduction to DSM/SCM Provides an overview of the functions and
capabilities of DSM/SCM and defines the terms
and concepts needed to understand
DSM/SCM.
2
DSM/SCM Interfaces and Tools Provides an overview of the DSM/SCM
interfaces and tools.
3
Hardware and Software
Requirements
Provides an overview of the hardware and
software required to run DSM/SCM on
NonStop systems. This section also describes
the DSM/SCM preinstalled configuration and
information about essential files that you
cannot purge or alter.
PART II DSM/SCM Configuration
4
Planning the DSM/SCM System
Environment and User Security
Describes host and target systems, logical
targets, and databases, and provides
guidelines for defining your systems. Describes
DSM/SCM tasks and provides guidelines for
assigning them.
5
Configuring DSM/SCM Gives step-by-step instructions for configuring
DSM/SCM and setting up the supporting
environment on the host and target systems.
PART
III
Software Installation and
Management
6
Managing Software With
DSM/SCM
Describes DSM/SCM use and the planning of
software management on your systems.
Provides an overview of the procedures
detailed in Sections 7 through 12.
7
Receiving and Managing
Software Inputs
Provides step-by-step procedures for receiving
and managing software inputs, and for
managing input and product groups.
8
Creating and Managing
Software Revisions
Provides step-by-step procedures for creating
software revisions in preparation for software
installation or updating. This section also
provides information on managing and sharing
software revisions.
9
Building and Applying a New
Configuration
Provides step-by-step procedures for building
and applying new configurations for target
systems.