DSM/SCM User's Guide

ASSIGNs and PARAMs
DSM/SCM User’s Guide — 529846-014
E - 3
Adding ASSIGN Statements for Tools
8. Deactivate Tool ASSIGNS. From the Build/Apply Request dialog box, select
Tandem>Support info>Activate tool assign again.
Table E-1 lists the tools that DSM/SCM uses and the file ASSIGNs that you can use to
direct DSM/SCM to use a file from a different location. Some tools have multiple
assigns, so different versions of tools can be used for different tasks. Assigns are
mostly limited to the Build/Apply activities. ASSIGNs specified from the planner
interface are not persistent. Each new Build and Apply starts with no ASSIGNs.
Table E-1. ASSIGNs (page 1 of 2)
File Product ASSIGN Name
Default
Location
Server-
Task
AS1 T8304 AS1 Config** CB-S
RL
BACKUP T9074 SYSGEN^BACKUP $SYSTEM* CB-sysgen
BACKUP $SYSTEM* CB-sysgen
AP^BACKUP $SYSTEM* CB-AP
BIND T9621 SYSGEN^BINDER Config** CB-sysgen
BKUPIN T0431 SYSGEN^BKUPIN Config** CB-sysgen
CAT T0431 SYSGEN^CAT Config** CB-sysgen
COUP COUP $SYSTEM* TA-*
DEFINEO T0431 SYSGEN^DEFINEO Config** CB-sysgen
DISKGEN T9074 SYSGEN^DISKGEN $SYSTEM* CB-sysgen
DOPPELG T6031 DOPPELG Config** CB-sysgen
ELD T0608 SYSGEN^ELD Config** CB-sysgen
DLL_ELD Config** CB-PubDLL
ENOFT SYSGEN^ENOFT Config** CB-sysgen
FILEMGR T9519 FILEMGR $SYSTEM* TA-*
FUP T6553 FUP $SYSTEM* TA-*
GMAKE T0593 SYSGEN^GMAKE Config** CB-sysgen
MKOSFS T0431 SYSGEN^MKOSFS Config** CB-sysgen
NLD T6017 SYSGEN^LINKER Config** CB-sysgen
SRL_NLD Config** CB-SRL
NSKCOM T5838 NSKCOM Config** CB-SRL
OCA T0448 SYSGEN^OCA Config** CB-sysgen
OSB T6031 SYSGEN^OSB Config** CB-sysgen
OSBOBEY T6031 SYSGEN^OSBOBE Config** CB-sysgen
OSBUILD T0431 SYSGEN^OSBUILD Config** CB-sysgen
OSGEN T0431
SYSGEN^OSGEN Config** CB-sysgen
OSPARSE T0431 SYSGEN^OSPARSE Config** CB-sysgen