DSM/Tape Catalog Management Programming Manual

Common Definitions
DSM/Tape Catalog Management Programming Manual—520481-003
4-62
ZMCS Maps
ZOPENEXCLUSION
denotes the tape exclusion mode (taken from the OPEN flag of the opening
process. Valid values are:
ZCATMANSTATUS
denotes the current relationship of DSM/TC to the requested tape. Valid values
are:
ZPROCESSCPU
denotes the process CPU number.
ZPROCESSPIN
denotes the PIN number.
ZDEFINECLASS
denotes the class of the DEFINE that contains the attributes and values associated
with this tape file. Valid values are:
ZMCS-VAL-TAPEUSE-OUT
Write data to tape.
ZMCS-VAL-TAPEUSE-INOUT
Read data from tape or write data to tape.
ZMCS-VAL-TAPEUSE-EXTEND
Add data to the last file on the tape.
ZMCS-VAL-OPENEXCL-SHARED
Shared access (for NL opens only)
ZMCS-VAL-OPENEXCL-EXCLUSIVE
Exclusive access (for BLP and LP opens)
ZMCS-VAL-OPENEXCL-PROTECTED
Protected access
ZMCS-VAL-CATMANSTAT-NOCATMAN
DSM/TC should be present, but it cannot
be found.
ZMCS-VAL-CATMANSTAT-PENDING
Waiting for a reply from DSM/TC.
ZMCS-VAL-CATMANSTAT-UNKNOWN
The specified tape is not controlled by
DSM/TC.
ZMCS-VAL-CATMANSTAT-KNOWN
The tape is controlled by DSM/TC.
ZMCS-VAL-CATMANSTAT-NOTCONFIG
DSM/TC exists but is not enabled.
ZMCS-VAL-CATMANSTAT-CONFLICT
Tape name exists in DSM/TC. However,
actual tape characteristics do not match
characteristics stored in database.