DSM/Tape Catalog Management Programming Manual

Errors

DSM/Tape Catalog Management Programming Manual—520481-003

A-48

5022 ZMCS-ERR-COUNTRESET

An attempt was made to reset the value for COUNT.

Cause. An attempt was made to reset the COUNT option.

Effect. The command does not execute.

Recovery. Do not attempt to reset the COUNT option.

5023 ZMCS-ERR-COUNTWONTFIT

The number of tapes specified with the COUNT option exceeds the number of tapes

specified in the tape-name part of the LABEL TAPEVOLUME command.

Cause. The number of tapes specified with the COUNT option exceeds the number of

tapes specified in the tape-name part of the LABEL TAPEVOLUME command. For

example, the name of the tape chosen was ABCDE0, with a COUNT of 50. ABCDE0

accommodates only up to 10 tapes (0 through 9).

Effect. The command does not execute.

Recovery. Make sure the tape-name you specify can generate as many tape names

as you specify with the COUNT option.

ZSPI-TKN-ERRLIST

ZSPI-TKN-ERROR token-type ZSPI-TYP-ERROR

ZSPI-TKN-ENDLIST

Corresponding MEDIACOM Error Message

COUNT cannot be reset.

ZSPI-TKN-ERRLIST

ZSPI-TKN-ERROR token-type ZSPI-TYP-ERROR

ZSPI-TKN-ENDLIST

Corresponding MEDIACOM Error Message

COUNT exceeded maximum for the TAPEVOLUME specified.