DSM/Tape Catalog Management Programming Manual

Errors

DSM/Tape Catalog Management Programming Manual—520481-003

A-71

5094 ZMCS-ERR-OVERIDEINVALID

A value other than ON or OFF was specified for the OVERRIDE option.

Cause. The value specified for OVERRIDE was not ON or OFF.

Effect. The command does not execute.

Recovery. Specify either ON or OFF as the OVERRIDE value.

5095 ZMCS-ERR-PHYSICALCOPYINVALID

A value outside the range 1 through 99 was specified for the PHYSICAL option.

Cause. The value specified for PHYSICAL was not 1 through 99.

Effect. The command does not execute.

Recovery. Specify a PHYSICAL value 1 through 99.

5096 ZMCS-ERR-PHYSICALCOPYRESET

An attempt was made to reset the value for PHYSICAL.

Cause. RESET with a reset value was specified for the PHYSICAL option.

Effect. The command does not execute.

Recovery. Use the HELP command to see what is valid for PHYSICAL, and specify a

valid value.

ZSPI-TKN-ERRLIST

ZSPI-TKN-ERROR token-type ZSPI-TYP-ERROR

ZSPI-TKN-ENDLIST

Corresponding MEDIACOM Error Message

OVERRIDE must be ON or OFF.

ZSPI-TKN-ERRLIST

ZSPI-TKN-ERROR token-type ZSPI-TYP-ERROR

ZSPI-TKN-ENDLIST

Corresponding MEDIACOM Error Message

PHYSICAL must be in the range 1 and 99.

ZSPI-TKN-ERRLIST

ZSPI-TKN-ERROR token-type ZSPI-TYP-ERROR

ZSPI-TKN-ENDLIST

Corresponding MEDIACOM Error Message

PHYSICAL cannot be reset.