Manualshelf

DSM/Tape Catalog Management Programming Manual

ManualsBrandsHP ManualsServerHP NonStop G-Series
261262263264265266267268269270
Errors
DSM/Tape Catalog Management Programming Manual—520481-003
A-97
5189 ZMCS-ERR-FILEIDMISMATCH
5189 ZMCS-ERR-FILEIDMISMATCH
The tape file read from the tape does not match the tape file specified in the command
line.
Cause. The tape file read from the tape does not match the tape file specified in the
command line.
Effect. The command does not execute.
Recovery. Either mount the correct tape, or specify the correct tape file ID.
5190 ZMCS-ERR-VOLINDEXMISMATCH
The tape mounted did not match the VOLUMEINDEX specified in the command.
Cause. The tape mounted did not match the VOLUMEINDEX specified in the
command. For example, if you specified that the tape mounted should be the first tape
in the set, and after the tape was mounted and read, DSM/TC found that it was the
second tape in the set, you would receive this error.
Effect. The command does not execute.
Recovery. Specify the proper VOLUMEINDEX for the tape.
ZSPI-TKN-ERRLIST
ZSPI-TKN-ERROR token-type ZSPI-TYP-ERROR
ZMCS-TKN-TAPEVOLUME token-type ZSPI-TYP-STRING
ZSPI-TKN-ENDLIST
Corresponding MEDIACOM Error Message
The tape file on the tape volume, tape-volume, does not match
the tape file specified.
ZSPI-TKN-ERRLIST
ZSPI-TKN-ERROR token-type ZSPI-TYP-ERROR
ZSPI-TKN-ENDLIST
Corresponding MEDIACOM Error Message
The VOLUMEINDEX specified does not match the tape volume
mounted.