DSM/Tape Catalog Management Programming Manual

ManualsBrandsHP ManualsServerHP NonStop G-Series

391

392

393

394

395

396

397

398

399

400

SSI Event Messages

DSM/Tape Catalog Management Programming Manual—520481-003

C-43

4 ZSSI-EVT-FATAL-FAULT,

zssi-val-msg-INIT-FAIL (8)

Recovery. Recovery depends on the cause of the error:

•

If the configured memory was insufficient, you might need to increase the

PMAP_MAXENTRIES define attribute (default 1000) in the portmapper.

•

If disk space was insufficient, move the data-swap volume to a disk with more

available space.

•

If a CPU overload occurred, you might need to run the process on another CPU

that is not heavily loaded, or you might need to reconfigure the system to increase

the amount of system resources (such as system data space for TLEs and process

control blocks).

4 ZSSI-EVT-FATAL-FAULT, zssi-val-msg-INIT-FAIL (8)

SSI initiation failed.

Cause. The cause is reported in an operator message logged earlier.

Effect. $ZSSI initiation failed.

Recovery. Check the previous operator messages to determine the cause of the error

and take appropriate action.

4 ZSSI-EVT-FATAL-FAULT, zssi-val-msg-INV-NI-TIMEOUT (43)

The calculated network time-out value is not a usable number.

Tokens in Event Message

ZSSI-TKN-PROC-CALLER token-type ZSPI-TYP-STRING.

ZSSI-TKN-MSG token-type ZSSI-TYP-MSG.

ZSSI-TKN-STAT token-type ZSSI-TYP-STAT

ZSSI-TKN-PROC-FAILED token-type ZSPI-TYP-STRING

Message Text

Initiation of ZSSI failed.