DSM/Tape Catalog Management Programming Manual

Tape Server Event Messages
DSM/Tape Catalog Management Programming Manual—520481-003
D-18
685 ZTAP-EVT-CMCONSOLEWRITE
•
The LSM address assigned to the tape drive (using the MEDIACOM/ MEDIASRV
ALTER TAPEDRIVE command) is the address of a different tape drive.
Effect. The OPEN operation fails, and file-system error 595 is returned.
Recovery. Correct the problem with the tape drive and retry the operation. If the
problem cannot be corrected, issue a PUP DOWN command to stop the NonStop
Kernel system from using the tape drive for automated cartridge system tapes. For
descriptions of file-system errors, see the Operator Messages Manual.
685 ZTAP-EVT-CMCONSOLEWRITE
An error occurred while trying to send a message to the DSM/TC console.
ZTAP-TKN-ERRMSGNUMBER
contains the error message number for this tape server error. The number for this
error is 1027.
ZTAP-TKN-FSERR
contains the file-system error number reported in this message.
ZEMS-TKN-TEXT
this second text token contains the console name.
Cause. An error occurred while trying to send a message to the DSM/TC console
(using the MEDIACOM/MEDIASRV ALTER CONSOLE command).
Effect. The DSM/TC console is automatically closed.
Recovery. To reopen the DSM/TC console, use the MEDIACOM/MEDIASRV ALTER
CONSOLE command. For descriptions of file-system errors, see the Operator
Messages Manual.
Tokens in Event Message
ZTAP-TKN-PROCESS token-type ZSPI-TYP-CRTPID.
ZTAP-TKN-ERRMSGNUMBER token-type ZSPI-TYP-UINT.
ZEMS-TKN-TEXT token-type ZSPI-TYP-STRING.
ZTAP-TKN-FSERR <1> token-type ZSPI-TYP-ENUM.
ZEMS-TKN-TEXT <2> token-type ZSPI-TYP-STRING.
Message Text
Error 1027 - Error <1> on DSM/TC console <2>