DSM/Tape Catalog Management Programming Manual

Tape Server Event Messages
DSM/Tape Catalog Management Programming Manual—520481-003
D-19
686 ZTAP-EVT-LINKDOWN
686 ZTAP-EVT-LINKDOWN
Communications between the tape server and a tape drive failed with a file-system
error.
ZTAP-TKN-ERRMSGNUMBER
contains the error message number for this tape server error. The number for this
error is 1028.
ZTAP-TKN-DEV-NAME
contains the name of the tape drive.
ZTAP-TKN-FSERR
contains the file-system error number reported in this message.
Cause. An error occurred while trying to communicate with a tape drive.
Effect. The tape drive is unavailable for labeled tape use. (Use the MEDIACOM/
MEDIASRV STATUS TAPEDRIVE command to view the tape drive status.)
Recovery. For descriptions of file-system errors, see the Operator Messages Manual.
Also consider:
•
If the CPU is down, reload the primary processor or backup processor of device.
•
If the CPU is not down, use a MEDIACOM/MEDIASRV STATUS TAPEDRIVE
command on the tape drive.
•
Stop the primary process of $ZSVR.
If the error persists, contact your service provider and provide all relevant information:
•
Descriptions of the problem and accompanying symptoms
•
Details of the messages generated
•
Supporting documentation such as Event Management Service (EMS) logs, trace
files, and a CPU dump, if applicable
Tokens in Event Message
ZTAP-TKN-PROCESS token-type ZSPI-TYP-CRTPID.
ZTAP-TKN-ERRMSGNUMBER token-type ZSPI-TYP-UINT.
ZEMS-TKN-TEXT token-type ZSPI-TYP-STRING.
ZTAP-TKN-DEV-NAME <1> token-type ZSPI-TYP-DEVICE.
ZTAP-TKN-FSERR <2> token-type ZSPI-TYP-ENUM.
Message Text
Error 1028 - Connection to <1> failed with error <2>