DSM/Tape Catalog Management Programming Manual

Tape Server Event Messages
DSM/Tape Catalog Management Programming Manual—520481-003
D-25
695 ZTAP-EVT-MEDIAMISMATCH
ZTAP-TKN-FSERR
contains the file-system error number reported in this message.
Cause. The third-party tape management system (TPTM) returned an error after
processing had already stopped.
Effect. The error is logged but ignored.
Recovery. Informational message only; no corrective action is needed.
695 ZTAP-EVT-MEDIAMISMATCH
The mounted tape volume’s density and mode did not match the requested density
and mode.
ZTAP-TKN-WRNMSGNUMBER
contains the warning message number for this tape server warning. The number
for this warning is 909.
ZTAP-TKN-TAPE-VOLUME
contains the tape volume name.
ZTAP-TKN-DEV-NAME
contains the drive name.
Cause. The requested and actual tape density and mode did not match. The
requested tape volume is mounted on the tape drive that does not support the
requested DENSITY and TAPEMODE. $ZSVR selects only tape drives that support the
requested DENSITY and TAPEMODE
Effect. The mount request is unsatisfied.
Recovery. Correct the DEFINE to either specify DENSITY and TAPEMODE or specify
the correct DENSITY and TAPEMODE, and retry the operation. If DSM/TAPE
CATALOG is not being used (via CLASS TAPECATALOG DEFINEs), the tape volumes
are automatically selected to match the specified DENSITY or TAPEMODE.
Tokens in Event Message
ZTAP-TKN-PROCESS token-type ZSPI-TYP-CRTPID.
ZEMS-TKN-TEXT token-type ZSPI-TYP-STRING.
ZTAP-TKN-WRNMSGNUMBER token-type zSPI-TYP-UINT.
ZTAP-TKN-TAPE-VOLUME <1> token-type ZTAP-TYP-TAPE-VOLUME.
ZTAP-TKN-DEV-NAME <2> token-type ZSPI-TYP-DEVICE.
Message Text
WARNING 909 - <1> ON <2> DOES NOT ALLOW REQUESTED
DENSITY/TAPEMODE