DSM/Tape Catalog Management Programming Manual

Tape Server Event Messages
DSM/Tape Catalog Management Programming Manual—520481-003
D-28
699 ZTAP-EVT-TAPEINUSE
ZTAP-TKN-DEFINE-NAME
contains the define name.
ZTAP-TKN-BADNUM
contains the error number received from the DSM/TC subsystem.
Cause. An error was returned from the TMF catalog while $ZSVR was automatically
attempting to find a TMF in the appropriate ACS. errornum contains the error
returned from the TMF catalog. Possible values are:
•
-3 TMF out of scratch tapes
•
-4 Alternate copy not found
•
-5 Cannot use alternate series copy after first tape
•
-6 No such TMF tape
•
-7 No such TMF dump
Effect. The request retries automatically after three minutes,.
Recovery. Correct the problem indicated by the errornum field. An operator can
either use the MEDIACOM ALTER TAPEMOUNT mount-sequence command to
force a retry before the three minutes are up or issue a MEDIACOM REJECT
TAPEMOUNT mount-sequence command to reject the request. No action is needed
to allow the request to retry automatically.
699 ZTAP-EVT-TAPEINUSE
The specified tape volume is being used by the specified process.
ZTAP-TKN-STSMSGNUMBER
contains the status message number. The number for this status message is 1516.
Tokens in Event Message
ZTAP-TKN-PROCESS token-type ZSPI-TYP-CRTPID.
ZEMS-TKN-TEXT token-type ZSPI-TYP-STRING.
ZTAP-TKN-STSMSGNUMBER token-type ZSPI-TYP-UINT.
ZTAP-TKN-TAPE-VOLUME <1> token-type ZTAP-TYP-TAPE-VOLUME.
ZTAP-TKN-DEFINE-NAME token-type ZTAP-TYP-DEFINE-NAME.
ZTAP-TKN-DEV-NAME <2> token-type ZSPI-TYP-DEVICE.
ZTAP-TKN-SYSNAME token-type ZSPI-TYP-CHAR8.
ZTAP-TKN-CPU <3> token-type ZSPI-TYP-UINT.
ZTAP-TKN-PIN <4> token-type ZSPI-TYP-UINT.
Message Text
STATUS 1516 - <1> TAPE ON DRIVE <2> USED BY <3>,<4>