DSM/Tape Catalog Messages Manual

Storage Server Interface Messages
DSM/Tape Catalog Messages Manual — 422947-007
9 - 5
Event Message 3
Recovery. Depending on the errors found in the EMS log, reestablish communication
with the portmapper and RPC. If the error is repeated, contact your service provider.
For more information, see the DSM/Tape Catalog User’s Guide.
3 (19)
Cause. An unsupported network protocol was passed to the csi_rpccall()
function.
Effect. $ZSSI terminates.
Recovery. This is a $ZSSI programming error. Contact your service provider.
3 (21)
queue_id
is the identifier of the $ZSSI connection queue.
member_id
is the ID of the queue member for which the $ZSSI is seeking status information.
Cause. $ZSSI cannot get status information about a message in an internal queue.
Effect. $ZSSI does not get status information.
Recovery. This event should not occur during normal operation. If it occurs frequently,
contact your service provider, and provide the EMS log that contains the message.
3 (22)
queue_id
is the identifier of the $ZSSI connection queue.
Cause. $ZSSI cannot put the ZSVR return address or the CSI return address on its
queue.
The possible causes of this event are:

Insufficient configured memory. The process was initiated with a fixed amount of
memory, and that memory was insufficient.
Invalid network protocol.
Can't get queue status Q-id: queue_id, Member: member_id
Can't add member to queue Q-id: queue_id.