DSM/Tape Catalog Messages Manual

Storage Server Interface Messages
DSM/Tape Catalog Messages Manual — 422947-007
9 - 15
Event Message 4

If disk space was insufficient, move the data-swap volume to a disk with more
available space.

If a CPU overload occurred, the process might need to be run on another CPU that
is not heavily loaded, or the system might need to be reconfigured to increase the
amount of system resources such as system data space for TLEs and process
control blocks (PCBs).
4 (32)
Cause. The NI's communications mechanism cannot accept a message from the
$ZSSI.
Effect. $ZSSI terminates.
Recovery. Depending on the errors found in the EMS log, reestablish communication
with the portmapper and RPC. If the error is repeated, contact your service provider.
For more information, see the DSM/Tape Catalog User’s Guide.
4 (35)
Cause. The $ZSSI XDR translation routines cannot translate a message completely
because it was damaged. This error might be due to an error in the client network or
the client application.
Effect. $ZSSI attempts to translate the message up to the point where the error was
detected. If the header part of the message is translatable, the message is forwarded.
Otherwise it is dropped.
Recovery. If the error is not caused by an error in the client network, report the
problem to your service provider. Provide the EMS log for analysis.
Cannot send message to NI: discarded.
XDR message translation failure.