DSM/Tape Catalog Messages Manual

Storage Server Interface Messages

DSM/Tape Catalog Messages Manual — 422947-007

9 - 19

Other Error Codes

These other error codes might be indicated in SSI event messages.

(1)

Cause. $ZSSI notifies you that an RPC number previously assigned to $ZSSI still

exists.

Effect. $ZSSI unmaps the number and remaps to a new one as a normal part of the

initiation. $ZSSI is initiated.

Recovery. Informative message only; no corrective action needed.

(37)

address

is the return address of the requesting CSI, expressed as an unsigned long integer.

port_id

is the identifier of the port on the system that provides communications with the

$ZSSI.

ssi_id

is the identifier for the $ZSSI.

protocol

is the type of network transmission protocol (TCP

or UDP).

Cause. $ZSSI encountered a process that is older than the connection time limit, or

the maximum number of time-out

s and retries were applied to a packet on the $ZSSI

network output queue.

The connection limit is defined by the CSI^CONNECT^AGETIME environment

variable. The time-out and retry limits are defined by the CSI^RETRY^TIMEOUT and

CSI^RETRY^TRIES environment variables.

Effect. $ZSSI drops the packet.

Recovery. Check previous $ZSSI EMS log messages for additional information on

why the packet was dropped. If the queue member was dropped because it was older

Unmapped previously registered RPC service.

Dropping from Queue: Address: address, Port: port_id,

ssi_identifier: ssi_id, Protocol: protocol