DSM/Tape Catalog Messages Manual

Catalog Manager (MEDIADBM) Error Messages
DSM/Tape Catalog Messages Manual — 422947-007
1 - 8
Error Numbers 1 Through 999
619
Cause. The DSM/TC clean-up process has not run in the last three days.
Effect. Because an unknown condition exists, the clean-up process will not run in the
future.
Recovery. If the system time is properly set, use the ALTER MEDIADEFS command
with the RESET EXPIRATION option to initiate the expiration process. If the system
time is not properly set:
1. Set the correct time.
2. Execute the ALTER MEDIADEFS command with the RESET EXPIRATION option.
3. Use the EXPIRE TAPEFILE command to initiate the expiration process.
620
Cause. The application process tried using a tape that is reserved by another process.
Effect. The OPEN fails, and processing does not continue.
Recovery. Select a different tape volume, or let DSM/TC select the tape.
621
Cause. The application process tried using a tape that is reserved by another process.
Effect. The OPEN fails, and processing does not continue.
Recovery. Select a different tape volume, or let DSM/TC select the tape.
**ERROR-619** The EXPIRE process has not run in the past 3
days. The RESET EXPIRATION option of the ALTER MEDIADEFS
command must be used to confirm that the system time is
correct.
**ERROR-620** Volume status must be SCRATCH or SELECTED.
**ERROR-621** Volume SELECTED by a different user.