DSM/Tape Catalog Messages Manual

Catalog Manager (MEDIADBM) Error Messages
DSM/Tape Catalog Messages Manual — 422947-007
1 - 11
Error Numbers 1 Through 999
630
Cause. An attempt to alter the status of a tape volume between ASSIGNED and FULL
failed because either the specified tape volume is in an incorrect state or the pool is not
append capable.
Effect. The requested operation terminates.
Recovery. No recovery, the operation cannot occur.
635
Cause. An attempt was made to perform a backup with the LONGNAME tape format
to a tape volume that was already assigned the ARCHIVE tape format.
Effect. The requested operation terminates.
Recovery. Use a scratch tape or a tape volume assigned the LONGNAME tape format
for this backup.
636
Cause. An attempt was made to perform a backup with the ARCHIVE tape format to a
tape volume that was already assigned the LONGNAME tape format.
Effect. The requested operation terminates.
Recovery. The requested operation terminates. Use a scratch tape or a t
ape volume
assigned the ARCHIVE tape format for this backup.
637
Cause. You used the MEDIACOM command ALTER MEDIADB, LONGNAME in
Backup Restore 2. The MEDIADBM checked all existing FILE CATALOGs in the local
Backup Restore for the database upgrade. If any of the local FILE CATALOG were
**ERROR-630** Unable to alter the tape volume because the
current status must be ASSIGNED or FULL, or is valid only for
append capable pools.
**ERROR-635** A tape volume already ASSIGNED to a ARCHIVE
Backup job was requested for a LONGNAME backup job.
**ERROR-636** A tape volume already ASSIGNED to a LONGNAME
Backup job was requested for an ARCHIVE backup job.
**ERROR-637** Media Catalog tables are at inconsistent
revision levels for this command; see the Support Note #03106
for a full description of the issue and an alternate upgrade
procedure.