DSM/Tape Catalog Messages Manual
DSM/Tape Catalog Messages Manual — 422947-007
2 - 1
2
MEDIACOM Syntax Error Message
Error Numbers 1000 Through 2000
The error messages documented in this section are returned if you enter the incorrect
syntax for MEDIACOM commands.
The errors in this section are listed in numeric order. However, not all of the available
error numbers in the range 1000 through 2000 are used. Error numbers not listed are
reserved for future use.
1000
Cause. A number is expected for this part of the command.
Effect. The command does not run.
Recovery. Specify a number.
1001
Cause. No parameters were specified for this command.
Effect. The command does not run.
Recovery. Specify at least one command parameter.
1003
Cause. More than 10 characters were specified for an IBM-MVS label.
Effect. The command does not run.
Recovery. Specify up to 10 characters.
**ERROR-1000** Number expected.
**ERROR-1001** At least one option must be specified.
**ERROR-1003** Owner exceeds maximum length for an IBM label.