DSM/Tape Catalog Messages Manual

MEDIACOM Syntax Error Message
DSM/Tape Catalog Messages Manual — 422947-007
2 - 4
Error Numbers 1000 Through 2000
1013
Cause. The priority specified was not in the range 1 through 199.
Effect. The command does not run.
Recovery. Specify a priority value within the allowed range 1 through 199.
1014
Cause. The CPU number specified was not in the range 0 through 15.
Effect. The command does not run.
Recovery. Specify a CPU number in the allowed range 0 through 15.
1015
Cause. The AUTOMATED option was specified with a value other than ON or OFF.
Effect. The command does not run.
Recovery. Specify either ON or OFF.
1016
Cause. The COMPRESSION option was specified with a value other than IDRC or
OFF.
Effect. The command does not run.
Recovery. Specify either IDRC or OFF.
1017
Cause. The BRIEF option cannot be specified with the DETAIL option.
Effect. The command does not run.
Recovery. Specify either the BRIEF or DETAIL option.
**ERROR-1013** Priority must be in the range 1-199.
**ERROR-1014** CPU number must be in the range 0-15.
**ERROR-1015** Automated must be ON or OFF.
**ERROR-1016** Compression must be IDRC or OFF.
**ERROR-1017** BRIEF and DETAIL cannot both be specified.