DSM/Tape Catalog Messages Manual

MEDIASRV Syntax and Content Error Messages
DSM/Tape Catalog Messages Manual — 422947-007
4 - 26
Error Numbers 5001 Through 6000
5144
Cause. The tape drive specified in the SPI buffer is on a different node than
MEDIASRV is.
Effect. The command does not execute.
Recovery. To communicate with remote tape drives, the MEDIASRV process must be
started on the same node as the tape drives.
5145
Cause. The TAPEDRIVE option was not specified.
Effect. The command does not execute.
Recovery. Specify the TAPEDRIVE option.
5146
Cause. An attempt was made to reset the value for TAPEDRIVE.
Effect. The command does not execute.
Recovery. Do not attempt to reset the value
for TAPEDRIVE.
5147
Cause. Wild-card characters were included in the tape drive specification.
Effect. The command does not execute.
Recovery. Do not include wild-card characters when specifying a tape drive.
**ERROR-5144** TAPEDRIVE $tape must be on the same system as
MEDIASRV.
**ERROR-5145** TAPEDRIVE is required.
**ERROR-5146** TAPEDRIVE cannot be reset.
**ERROR-5147** TAPEDRIVE $tape cannot be wildcarded.