DSM/Tape Catalog Operator Interface (MEDIACOM) Manual

MEDIACOM Commands
DSM/Tape Catalog Operator Interface (MEDIACOM) Manual—429828-010
2-113
INFO MEDIADEFS Command
If the system time is incorrect, correct it with the operating system SET TIME
command, then issue ALTER MEDIADEFS with the RESET EXPIRATION option. If the
system time does not need correcting, issue ALTER MEDIADEFS with the RESET
EXPIRATION option to confirm that the time is correct and to allow the clean-up
process to run.
INFO MEDIADEFS
entered without a node name and an OUT file, sends information for the current
default node to your current default output file (usually your home terminal).
\node
is the node you are interested in. The default is the current default node.
OUT out-file
specifies where the report is displayed or written. You can name a disk file or a
device, such as a printer or terminal. If not given, the information is sent to your
current default output file (usually your home terminal).
Examples

To show the system default information retrieved for the current default node,
\SKY:
MC> INFO MEDIADEFS
Search List (\SKY, \STAR, \SEA)
File Catalog \SKY.FILE_CATALOG_SKY
Volume Catalog \SKY.MASTER_TAPE_CATALOG
Pool Name OPERATIONS_TAPES
Retention 30 DAYS
Abend Retention 2 DAYS
Support Level MEDIACATALOG
Automated OFF
Compression OFF

To show information retrieved for \SEA when there might be a problem with the
system’s clock:
MC> INFO MEDIADEFS \SEA
Search List (\SEA, \SKY, \STAR)
File Catalog \SEA.FILE_CATALOG_SEA
Volume Catalog \SKY.MASTER_TAPE_CATALOG
Pool Name ALL_TAPES
Retention 45 DAYS
Abend Retention 1 DAY
Support Level MEDIACATALOG
Automated OFF
INFO MEDIADEFS [ \node ] [ , OUT out-file ]