DSM/Tape Catalog Operator Interface (MEDIACOM) Manual

MEDIACOM Commands
DSM/Tape Catalog Operator Interface (MEDIACOM) Manual—429828-010
2-136
INFO TAPEVOLUME Command
vcat Name of the volume catalog that owns pool.
pool Name of the pool in which tname is cataloged.
tname Name of the tape. These names are listed in alphabetical order when more than
one tape is selected for the report.
label Type of tape label. The value of label can be:
ANSI Tape with ANSI standard label
BACKUP Tape with BACKUP label
IBM Tape with IBM-MVS standard label
TMF TMF label
type Specifies the type of tape. The value of type can be:
3480 Model 3480 cartridge tape
5120 Model 520 cartridge tape
OPEN Open-reel tape
tfmt Type of tape format for tape volumes of label type BACKUP. The value of tfmt
can be:
ARCHIVE Tape volume has the label type BACKUP and
contains data written by BACKUP (T9074) or
BACKCOPY utility.
LONGNAME Tape volume has the label type BACKUP and
contains data written by Backup and Restore
2.0 BACKUP.
NONBACKUP Tape volume does not have the label type
BACKUP. TAPEFORMAT is applicable only for tape
volumes of label type BACKUP.
stat Status of the tape. The value of stat can be:
ASSIGNED Tape contains an unexpired file.
BAD Tape is defective and should not be used.
INUSE Data is being read from or written to the
tape.
RELEASED All files on the tape have expired, but it
cannot be used as a scratch tape.
SELECTED Tape has been chosen by DSM/TC to satisfy a
tape mount request.
SCRATCH All files on the tape have expired, and it can
be used as a scratch tape.