DSM/Tape Catalog Operator Interface (MEDIACOM) Manual

MEDIACOM Commands
DSM/Tape Catalog Operator Interface (MEDIACOM) Manual—429828-010
2-168
STATUS TAPEDRIVE Command
Figure 2-11. STATUS TAPEDRIVE Detail Format
Tape Drive $tape
Drive Status dstat
Label Type label
Tape Name tname
Tape Status tstat
Pool Name pool
Volume Catalog vcat
Process Name $proc
Process (CPU,PIN) c,p
Tape Use i/o
Open Exclusion openex
Comment comment
Open Mode open
Define Class class
Define Name def
Program Name prog
$tape Name of the tape drive.
dstat Tape drive status. The value of dstat can be:
DOWN Drive is down.
FREE Drive is free, and the tape mounted is
not a scratch
INUSE Tape is mounted and being read
from or written to.
UNAVAILABLE Both processors owning the tape drive are
down.
label Type of tape label of mounted tape. The value of label can be:
ANSI ANSI standard label
BACKUP BACKUP label
IBM IBM-MVS standard label
OMITTED No label
TMF TMF label
tname Name of the tape if a standard labeled tape is mounted; not present if the tape is
not a standard labeled tape or if no tape is mounted.