DSM/Tape Catalog Operator Interface (MEDIACOM) Manual

MEDIACOM Commands
DSM/Tape Catalog Operator Interface (MEDIACOM) Manual—429828-010
2-171
STATUS TAPEMOUNT Command
STATUS TAPEMOUNT Command
STATUS TAPEMOUNT lists the outstanding tape mount requests on a node.
STATUS TAPEMOUNT
entered without a message number and BRIEF or DETAIL, displays a brief report
of all outstanding mount requests on the current default node.
\node.message-number
\node
is a number assigned by $ZSVR to the mount message of the requested tape. This
number can be found with a STATUS TAPEMOUNT command. Include \node
when the tape drive is not on your current default node.
BRIEF | DETAIL
specifies how much information you want retrieved. BRIEF, the default, retrieves
less information than DETAIL. For the report formats, see Considerations on
page 2-169.
Considerations

Format of brief report
STATUS TAPEMOUNT [ [ \node.]message-number ]
[ \node ]
[ , BRIEF | DETAIL ]
Figure 2-12. STATUS TAPEMOUNT Brief Format
Tape Tape Label Write
Mount Name Type Node or Device Prot Action Needed
----- ------ ---- -------------- ----- -------------
number tname type nodedev prot action