DSM/Tape Catalog Operator Interface (MEDIACOM) Manual

MEDIACOM Commands
DSM/Tape Catalog Operator Interface (MEDIACOM) Manual—429828-010
2-12
ADD POOL Command (Super Group Only)
DLTIII
Only DLTIII tapes are permitted.
DLTIV
Only DLTIV tapes are permitted.
LTO1
Only LTO1 tapes are permitted.
LTO2
Only LTO2 tapes are permitted.
LTO3
Only LTO3 tapes are permitted.
LTO4
Only LTO4 tapes are permitted.
LTO5
Only LTO5 tapes are permitted.
OPEN
Only open-reel tapes are permitted.
SDLT
Only SDLT tapes are permitted.
SEARCHSPACE { EXCLUDED | INCLUDED }
determines if the pool is included in the system search space:
EXCLUDED
does not include the pool in the system search space. Only use
SEARCHSPACE EXCLUDED for special cases, such as when managing tapes
from another site that have the same names as tapes at your site.
INCLUDED
includes the pool in the system search space. The default is INCLUDED.
Once a pool is established as included or excluded, you cannot change it with a
subsequent ALTER POOL command. To change a pool’s search space attribute,
you must delete the pool and re-create it. For details, see Considerations on
page 2-12.