DSM/Tape Catalog Operator Interface (MEDIACOM) Manual

MEDIACOM Commands
DSM/Tape Catalog Operator Interface (MEDIACOM) Manual—429828-010
2-30
ADD TAPEVOLUME Command (Super Group Only)
OFF
catalogs the tape when no duplicate name is found in the entire system search
space. If the entire system search space is not available, ADD TAPEVOLUME
does not execute. The default is OFF.
STATUS { RELEASED | SCRATCH }
is the tape’s status:
RELEASED
All files on the tape might be expired, but the tape should not be reused until its
status in the catalog is manually changed to scratch with ALTER
TAPEVOLUME.
SCRATCH
The tape is ready for immediate use as a scratch tape. The default is
SCRATCH.
[, TYPE { ANY | CART3480 | CART3490 | CART5120 | DAT|
CART9840 | DDS | DDS2 | DDS3 | DLTIII | DLTIV | LTO1 | LTO2 |
LTO3 | LT04 | LT05 | OPEN | SDLT } ]
is the tape’s physical type:
CART3480
Only model 3480 tape cartridge.
CART3490
Only model 3490 tape cartridges are permitted.
CART5120
Only model 5120 tape cartridge.
CART9840
Only model 9840 tape cartridges are permitted.
DAT
Only DAT tapes are permitted.
DDS
Only DDS tapes are permitted.
DDS2
Only DDS2 tapes are permitted.